Your shopping cart is empty!
Shopping Cart
0 item(s) - $0.00
Use coupon code (1230123) to get 10% off
Welcome visitor you can login or create an account.
Links
Categories
Arduino UNO R3 Microcontroller Board
Product Code: ARDUINO UNO R3
Availability: In Stock
Availability: In Stock
Price: $32.08
Qty:
- OR -
Add to Wish List
Add to Compare
Add to Compare
Arduino UNO R3 Microcontroller Board
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.
Revision 2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new features:
- 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
- Stronger RESET circuit.
- Atmega 16U2 replace the 8U2.
Specifications:
| ARDUINO MICROCONTROLLER | |
| Microcontroller | ATmega328 |
| Architecture | AVR |
| Operating Voltage | 5 V |
| Flash memory | 32 KB of which 0.5 KB used by bootloader |
| SRAM | 2 KB |
| Clock Speed | 16 MHz |
| Analog I/O Pins | 6 |
| EEPROM | 1 KB |
| DC Current per I/O Pins | 40 mA on I/O Pins; 50 mA on 3,3 V Pin |
GENERAL | |
| Input Voltage | 7-12 V |
| Digital I/O Pins | 20 (of wich 6 provide PWM output) |
| PWM Output | 6 |
| PCB Size | 53.4 x 68.6 mm |
| Weight | 25 g |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Description
Arduino UNO R3 Microcontroller Board
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.
Revision 2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new features:
- 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
- Stronger RESET circuit.
- Atmega 16U2 replace the 8U2.
Specifications:
| ARDUINO MICROCONTROLLER | |
| Microcontroller | ATmega328 |
| Architecture | AVR |
| Operating Voltage | 5 V |
| Flash memory | 32 KB of which 0.5 KB used by bootloader |
| SRAM | 2 KB |
| Clock Speed | 16 MHz |
| Analog I/O Pins | 6 |
| EEPROM | 1 KB |
| DC Current per I/O Pins | 40 mA on I/O Pins; 50 mA on 3,3 V Pin |
GENERAL | |
| Input Voltage | 7-12 V |
| Digital I/O Pins | 20 (of wich 6 provide PWM output) |
| PWM Output | 6 |
| PCB Size | 53.4 x 68.6 mm |
| Weight | 25 g |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
tabletme.com © 2023 - All Rights Reserved.